Collection: Heat Transfer Vinyl Rolls

Yes, they are generally considered the same type of vinyl, used for heat application to fabrics. While the terms are used interchangeably, the term "heat transfer vinyl" (HTV) is more common in professional settings where heat presses are used. "Iron-on vinyl" typically refers to the same material but emphasizes application with a household iron. The suggestion that iron-on vinyl is a "special, lightweight paper" is inaccurate; both are vinyl materials.

Absolutely! While specialized equipment makes the process easier, you can definitely work with heat transfer vinyl using common household items. For cutting, scissors or a craft knife will do the trick. Instead of a heat press and parchment paper, you can use a regular household iron (set to the cotton setting with no steam). It's crucial to protect your design and the fabric you're applying it to. Use a heat-resistant barrier such as a Teflon sheet, silicone baking paper, a piece of thin cotton fabric, or a heat press cover sheet. Apply firm, even pressure with the iron for the time specified on your vinyl's packaging instructions.

Absolutely! You can achieve multi-color designs by layering different HTV colors. A common technique is to layer lighter colors over darker ones. For instance, applying black HTV first, then layering yellow on top on a white shirt, results in a two-color design using only two layers of vinyl. This method provides a cleaner look than using three separate layers. Consult this guide for a more in-depth explanation.

The ideal HTV size depends on the shirt size. For adults, a design width between 9 and 13 inches is generally recommended. Smaller shirts (like XS or S) will look better with designs closer to 9 inches, while larger shirts (like XL or 2XL) can handle designs closer to 13 inches. For toddler shirts, a 5x5 inch design is a good starting point, but you can adjust this based on the specific design and your personal preference. Our comprehensive guide provides more detailed sizing recommendations for different shirt sizes.

1. Turn over the vinyl:

If it has a paper backing, it's adhesive vinyl (permanent vinyl).

If it's the same color on both sides, it's heat transfer vinyl.
2. Check the material's adhesive:

If the PET liner (clear film) has adhesive, it's heat transfer vinyl.

If the vinyl itself has adhesive, it's permanent vinyl.
3. Usage test: Permanent vinyl cannot be applied with an iron or heat press.

Most HTV types require a temperature between 145-160°C (293-320°F) for 15-20 seconds. Here's a breakdown:

145-155°C (293-311°F) / 15-20 seconds: Standard, Patterned, Chameleon, Glow in the Dark, and Metallic HTV.

150-160°C (302-320°F) / 15-20 seconds: Glitter, Color-changing, Flocked, Holographic, Reflective, and Sublimation HTV. Puff HTV also falls within this temperature range, but may be done as low as 150°C.

160°C (320°F) / 40-50 seconds: Printable HTV.

For more specific settings on HTVRONT products, refer to heat press guide or downloa heat press manual for optimal results.

Heat transfer vinyl can last up to 50 wash cycles with proper care. It has a shelf life of one to two years, but for optimal results, it’s best to use it within a year as the adhesive backing may degrade over time. To extend its durability, you can apply Plastisol Clear over the transfer and press it for 30 seconds at 385°F.

Heat transfer vinyl is typically made of polyurethane (PU), thermoplastic polyurethane (TPU), or polyvinyl chloride (PVC). Among these, PU vinyl is generally considered a higher quality option than PVC because it is more eco-friendly, more heat-resistant, softer, and less prone to peeling. HTVRONT primarily offers PU vinyl and emphasizes its advantages of being eco-friendly, heat-resistant, soft, and resistant to peeling. HTV uses a heat-activated adhesive, which is usually polyester-based.

Heat Transfer Vinyl (HTV) can be used on a variety of materials, including cotton, polyester, poly/cotton blends, canvas, denim, and sometimes neoprene. While HTV can work on many materials, 100% cotton is often considered the most reliable and easiest to work with. It consistently provides excellent adhesion and results. Poly/cotton blends are also a good option.

While cotton is generally recommended, successful application can also depend on the specific type of HTV and the application process (heat, pressure, time). Experimenting with different materials is a good way to find what works best for your specific projects and preferences. You might find good results with materials like neoprene or certain polyester blends, but testing is recommended.

Therefore, while 100% cotton is often the easiest and most consistent option, especially for beginners, it is not always required. A blend of cotton and polyester can also work well.

Some items are not ideal for vinyl application due to their texture, durability, or surface properties:

Towels: Frequent washing weakens HTV adhesion, and their texture makes bonding difficult.

Balloons: The non-rigid surface hinders proper vinyl sticking, and their short lifespan often doesn’t justify the effort.

Flip-Flops: Environmental factors like sand and water cause rapid peeling, although they can work for short-term use.

Paper: Regular adhesive vinyl may tear paper when transfer tape is removed. Low-tack materials can be used for delicate surfaces like cardstock.

Leather: Many leather types cannot handle HTV’s required heat, though faux leather works well.

Glass: Vinyl doesn’t adhere well for long-term use. Etching is a better alternative for glass designs.

Plush Items: Fluffy textures prevent adhesion. Smooth plush materials are more suitable.

Silicone Items: The slick and stretchy surface causes vinyl to peel frequently.

When cutting HTV, the shiny side/glossy side, also known as the carrier side, should be placed face down on the cutting mat. The matte side should face up. Simply put, "shiny side down, matte side up."

Why shiny side down? The carrier sheet protects the design during cutting and aids in transfer.

What if it's wrong? The blade could cut the carrier sheet, ruining the cut and potentially damaging the mat. It will also prevent proper transfer.

Key Points for Cutting HTV:

Mirror/Flip your design.

Do a test cut.

Shiny/Carrier side: Down.

Matte side: Up.

This ensures successful heat transfer projects.

Yes, mirroring is necessary for certain types of vinyl. Specifically, you must mirror designs when cutting heat transfer vinyl (HTV), also known as iron-on vinyl. This is because HTV is cut from the back, so mirroring ensures the design is correctly oriented when ironed onto the final surface. The shiny carrier sheet should be placed face down on your cutting mat.

While you can mirror all designs before cutting, it's only essential for HTV. For regular adhesive vinyl, mirroring is not required. Transfer tape is needed for regular adhesive vinyl regardless of whether you mirror the design or not.