How to Press DTF Transfers with Heat Press

Many crafters agree sublimation printing on 100% cotton T-shirts can be challenging because of very limited existing methods to achieve this. However, with the emerging innovation in  Direct-to-Film (DTF) printing, sublimation transfers on cotton T-shirts are now easy. In this guide, we’re going to take you through all the steps involved in DTF sublimation transfers. So buckle up and let's explore this amazing way to personalize your T-shirts with works of art.

DTF sublimation is considered a hybrid printing method that uses a specially formulated adhesive powder and a film to come up with vibrant and durable prints. Whether you’re running a small business or a larger clothing manufacturing company, this technique can give you amazing printing results. So let's see what is needed and the technique for doing DTF sublimation transfers.

Let's get started, here’s what we will need for your DTF transfers:

Start by creating your designs or importing them into your computer. You can use creative design software such as Canva and Adobe Illustrator . Ensure the resolution is high (we recommend 300 DPI ). Mirror your designs before printing.

After creating or importing your designs, you now need to print them using a sublimation printer. Grab a piece of DTF film and look for the label showing which side you can’t print on. So make sure you get that right before you start printing.

Put the DTF film into the sublimation printer and print. The sublimation ink will adhere to the film according to the pattern you want to print. The film will come out with the printed design but also the ink will still be wet. So handle the film with care to avoid ink smudges.

The next step is to powder the DTF film with the design while the ink is still wet. 

Sprinkle DTF Special Hot Melt adhesive powder onto the wet ink. Make sure the powder covers the image or design evenly so that the transfer effect is smooth and lasts a long time. 

Shake the DTF film back and forth to cover everything with the powder. Once everything has been covered, get rid of the powder. Then flick your finger a few times on the film to get rid of the excess powder particles. You can be able to see that each part of the pattern is evenly coated with powder.

Now that your sublimation designs are ready to be transferred, we’re going to use a heat press machine. In this tutorial, we’ve used HTVRONT Manual Heat Press.

Now let’s set the right temperature to heat the powdered DTF film. The heating temperature we’ll use is 380°F and a heating time of 2 - 3 minutes. Wait for the heat press to heat up.

Once the temperature is ready, place the design facing up on the heating pad and heat for 2 - 3 minutes until all the powder completely melts and solidifies into the image. Now you can see the colors of the design are more vivid and beautiful after heating. 

To enhance the adhesion and detail of the image, and make the transfer clearer and more delicate, add a second layer of powder. This second dusting helps fill any areas that might have been missed during the first round. 

Ensuring the powder evenly covers the entire image will also improve the design’s wash resistance. Keeping it in good condition and less likely to peel off after multiple washes. Don’t forget to collect any excess powder for recycling in your next DTF sublimation transfers.

Heat the DTF film again until all the powder has melted and solidified into the image.

Now place the cotton T-shirt on the heating pad of the Heat Press. Make sure the surface is clean and dust-free. Ironing the T-shirt flat before heat pressing the image will make it easier for the pattern to adhere.

Place the image film side facing down on the T-shirt, cover it with the teflon sheet, and heat press for 40-60 seconds at 380°F.

Wait for the film and T-shirt to cool slightly, then carefully peel off the film. To improve the washability of the image, press again at 380°F for 5 - 10 seconds .

Doing DTF sublimation transfer is as simple as illustrated. You can still learn more techniques by watching other crafters online. Have a look at this YouTube video by HTVRONT to understand more about DTF Sublimation transfers.

Your DTF Sublimation transfers will not always go as planned. You might encounter some common challenges that every other crafter comes across. Let’s have a look at some of these challenges, what causes them, and possible solutions.

• Adhesive Powder Clumping: This happens because of moisture in the powder or uneven application. Make sure you store your adhesive powder in a dry and airtight container. During application, make sure the powder evenly covers the design on the DTF film.

• Uneven Transfers: This is common when you apply inconsistent heat and pressure during transfer. Double-check your heat and press time settings and apply even pressure acrossthe design during pressing.

• Ink Smudging: Smudging occurs when you handle the film before the ink is fully cured. Give the design some time for the ink and powder to cure completely before handling the film.

• Uneven Adhesion: Adhesion issues happen when there is insufficient curing of the power or inadequate press time. Do a thorough job during the design and recheck your press time settings for proper heat and pressure during transfer.

• Cracking or Peeling Designs: This is because of overheating or poor-quality adhesive powder. Ensure you’re using high-quality adhesive powder and avoid excessive heat during application.

Some of the best tips to practice and precautions to take include:

• Material Compatibility: Run tests for your sublimation designs, fabric, printing film, and printer to be sure that your materials are compatible.

• Proper Storage: Store your DTF films and Adhesive Powder in a cool, dry place to prevent degradation. Moisture can cause the powder to clump.

• Regular Printer Cleaning: Maintain your DTF printer properly by performing regular cleaning cycles to avoid clogs or smudges.

• Proper Ventilation: Work in a well-ventilated area when curing the adhesive powder to avoid inhaling fumes.

• Use Protective Gear: Always have your gloves and mask on when handling powder adhesive to prevent skin irritation or inhalation.

• Heat Press Maintenance: Regularly clean the heat press plate to prevent residue buildup that could affect transfers.

Some of the questions that have been asked by the crafting community include:

This guide has given you a detailed DTF sublimation transfer process to master and unlock endless creative possibilities for personal and professional projects alike. The ball is in your court, just find the right materials and follow the technique given in this guide to make vibrant and durable sublimation designs with DTF printing.

Share this guide with other DTF sublimation printing enthusiasts so that they can also further their creativity. We wish you all the best in your next creative project!