Tutorials >> Learn the machine and material's tutorials of HTVRONT

E15 Embroidery Machine Long-Term Maintenance

September 29, 2026

This guide covers long-term maintenance for the HTVRONT E15 embroidery machine: weekly cleaning of the needle plate and trimmer area, inspection of the upper threading...

Tia Isom

E15 Embroidery Machine Daily Cleaning, Oiling and Maintenance

September 28, 2026

This guide covers the HTVRONT E15 Embroidery Machine daily cleaning and maintenance routine: safety prep, needle inspection, hoop and fabric checks, bobbin case and rotary...

Tia Isom

How to Use the Bobbin Winder of Embroidery Machine - E15 Lesson 15

September 23, 2026

Covers bobbin winder assembly, winding process, uneven thread fix, loose bobbin adjustment, and video tutorial for the E15 embroidery machine. ...

Tia Isom

How to Make an Appliqué Patch with Embroidery Machine - E15 Lesson 14

September 22, 2026

Create appliqué embroidery on the E15 using a digitized appliqué design, stop codes, and heat transfer vinyl or fabric. Steps include hooping, aligning, placing the...

Tia Isom

Large Flat Frame Embroidery of E15 Embroidery Machine - Tutorial 13

Large Flat Frame Embroidery of E15 Embroidery Machine - E15 Lesson 13

September 22, 2026

This tutorial covers large flat frame embroidery on the E15: installing the extension table, hooping and mounting the aluminum frame, starting embroidery, and removing the...

Tia Isom

How to Create 3D Hat Embroidery - E15 Lesson 12

September 21, 2026

3D hat embroidery on the E15 uses EVA foam and 3D-ready designs. The tutorial covers hooping, design setup, adding EVA, stitching at 500 SPM, and...

Tia Isom

How to Align an Embroidery Design with Positioning - E15 Lesson 11

September 21, 2026

Lesson 11 shows how to align embroidery designs on the E15. Mark fabric, select frame, choose alignment point and direction, align two reference points, run...

Tia Isom

Touchscreen Overview of E15 Embroidery Machine - E15 Lesson 10

September 21, 2026

Lesson 10 walks through the E15's full touchscreen interface: status bar, design preview, design information, function controls (pattern select, frame select, color setup, trace, origin,...

Tia Isom

How to Replace the Needle of E15 Embroidery Machine - E15 Lesson 9

September 20, 2026

Step-by-step guide to replacing the needle on the E15 embroidery machine. Covers when to replace, inspecting the needle bar area, setting the 100° position, removing...

Tia Isom

How to Import Embroidery Designs from IdeaStudio - E15 Lesson 8

September 16, 2026

Lesson 8 of E15 series: import designs via HTVRONT IdeaStudio over WiFi. Covers connecting the machine, creating tasks, sending designs, batch sending, and combining designs...

Tia Isom

How to Import a Design from USB Drive - E15 Lesson 7

September 16, 2026

Lesson 7 of E15 series: import designs from USB drive. Covers supported formats (DST/DSB), step-by-step import, assigning numbers, and finding designs in the Pattern Library....

Tia Isom

Quick Upper Thread Tension Check - E15 Lesson 6

September 15, 2026

This complete guide covers upper thread tension on the E15 embroidery machine: why it matters, how to run the "I" test pattern, read stitch balance,...

Tia Isom

Quick Bobbin Thread Tension Check

September 15, 2026

Learn how to check bobbin tension on the E15 embroidery machine. The drop test takes seconds: slow descent is correct, fast is loose, stuck is...

Tia Isom

How to Thread the Upper Thread - E15 Embroidery Machine Lesson 4

September 14, 2026

Learn how to thread the upper thread on the 15 Needle Embroidery Machine (E15) from start to finish. This Tutorial 4 covers the complete threading...

Tia Isom

How to Embroider a Hat - E15 Embroidery Machine Lesson 3

September 10, 2026

Master hat embroidery on the 15 Needle Embroidery Machine with this E15 lesson. Remove the garment hoop, install the Cap Driver, hoop a cap, align...

Tia Isom

How to Embroider a Shirt - E15 Embroidery Machine Lesson 2

September 9, 2026

E15 embroidery machine first garment project — remove Cap Hoop and Cap Driver, install Garment Hoop, quick-thread 15 colors, install bobbin, startup, hooping fabric with...

Tia Isom

Unboxing and Installation of E15 15 Needle Embroidery Machine - Lesson 1

Unboxing & Installation of E15 Embroidery Machine

September 8, 2026

E15 embroidery machine unboxing and installation guide — wooden crate opening, shipping bracket removal, stand assembly (base plate, uprights, crossbars, shelf), machine placement, final stability...

Tia Isom