Introducing The New HTVRONT Auto Heat Press II-Digit

Making your craft projects a success is our major focus because we believe the sky's the limit when it comes to creativity. We aim to improve functionality and simplify your experiences in expressing your ideas.

As a result, we’re introducing to you the new HTRONT Auto Heat Press II-Digit which comes in a sleek, ergonomic, compact design that fits perfectly well in crafting spaces, small or large. This updated version of the first-generation model is suitable for home and business use. It has an auto-down & up mechanism and a slide-out tray for easy loading and unloading of your materials.

Its advanced program guarantees accuracy in setting the right temperature, pressure, and press time to ensure a professional experience and outcomes. With its increased pressing height of up to 4.5 cm and a 15-minute auto-off safety feature, the new HTVRONT Auto Heat Press II-Digit is the right bestie to have in crafting projects. 

The new HTRONT Auto Heat Press II-Digit allows you to reach high temperatures ( up to 410°F or 210°C ) in less than 2 minutes, which is faster than the first model. This is a time saver in your projects which means you can now handle more projects in a day than before.

Say goodbye to manually setting up your pressure during heat pressing. The pressure system controls in HTRONT Auto Heat Press II-Digit have been automated to be more even in both distribution and sensitivity. This increased efficiency in your projects.

This new model has a touchscreen that comes with pre-set options for different materials. The intuitive touch screen makes it easier to operate. The gadget turns itself off if not used for 15 minutes because safety is our top priority.

The plate surface of this new model has been increased allowing you to work with up to 4.5 cm pressing height. This enables you to meet various crafting needs and allows you to try different crafting projects. You’re not limited in terms of size now.

Using the new Auto Heat Press II machine from HTVRONT is even much easier compared to the first generation. The automation of features means you only need to know your temperature and press time settings, the rest is easy-peasy. It’s not as complicated as you might think, it’s more like operating your smartphone. Follow these six simple steps below to get you started on using your new Heat Press II gadget.

Connect your machine to a power socket and let it energize. Now press on the “ Power ” button for the machine to turn on. Once it’s on, the tray will be automatically released. The default settings of your temperature, time, and pressure will be set at 100°C/210°F, 20s, 20kg/50lb .

The next step is to set the correct temperature, time, and pressure according to your project's requirements. Use the control panel to make your desired settings. Also, this new model's automation of the pressure function means you don’t need to set the pressure manually. 

The machine will automatically apply the correct pressure based on the thickness of the materials you want to heat press. Once set, the heating plate will begin to warm up while the “ Start ” key flashes red.

Now, place your garment on the lower platen making sure it’s flat enough. Do a quick 2 to 3-second pre-press so that you remove all the wrinkles and moisture. This will create a smooth surface for you to have improved results in your vinyl projects. Place a parchment paper or teflon sheet over the materials before pre-pressing.

Now place the materials you’re working on such as your shirt or any other fabric on the ironing mat. You can use high-temperature tape to hold your garment or any materials you’re working with on an ironing mat. For your vinyl designs on garments, confirm the adhesive side is facing down and the shiny side up. Make sure the ironing board back is pushed back to the innermost side for accurate pressing.

After perfectly positioning your material and the designs, press the “ Start ” button for the machine to close the heat press while starting the countdown. Don’t worry about the pressure because this will be automatically applied by the machine for the set time duration. You just have to wait for the press to release once the set time is complete, and carefully remove the garment or materials you were heat pressing.

Once the countdown comes to an end, the pressing will be completed and the heating plate will automatically be raised and the parameters on reset mode. Remove your garment or materials and peel off the carrier sheet immediately if you were working with a hot peel vinyl. 

Let the garment or the material cool down before peeling when dealing with a cold peel vinyl. Now check your designs to confirm if they’ve adhered fully and evenly to your garment or material. You can repeat the heat pressing process if some of the areas on your design have not adhered properly.

The table below summarizes how HTVRONT Auto Heat Press II compared with Auto Heat Press I. Have a look so that you know what you’ll be getting from your new Auto Heat Press II-Digit and why you need to upgrade from the first-generation model.